Hornady Lock-N-Load Classic Single Stage Reloading Press

$275.00
Product Information:
The Lock-N-Load Classic is the only single-stage press to feature quick change dies. If you reload more than one caliber and want the ease and simplicity of a single-stage press, you want Hornady’s Lock-N-Load Classic. The Lock-N-Load Bushings make changing calibers with a single-stage press faster and easier than ever before. Switch from one die to another with just a quick twist, no screwing and unscrewing dies or die adjustments are needed. With the Lock-N-Load Classic, you’ll load more shells in less time than ever before. Primer Feed sold separately.

LEE – CLASSIC CAST PRESS SINGLE STAGE

$273.00
Product Information

Now includes Breech Lock Bushing Update Kit

The largest opening in the industry and the longest stroke-- handle is adjustable to provide the least travel of any press. Rigid cast iron construction in a classic "O" design for maximum strength. Baked powder coating is durable and makes the Classic Cast a handsome addition to any reloading bench. Adjustable handle is movable side to side for left or right hand operation. Start and stop position is adjustable with a 48-tooth ratchet type handle clamp. In addition, the handle length is completely adjustable. Shorten it when loading handgun and short rifle cases. Automatic primer arm with bottom of stroke priming for best feel. Includes two primer arms for large and small primers. No more fumbling with tiny guides and springs. The original Classic Cast designed to work with large series 1 1/4-12 dies. Includes breech lock quick change adapter and breech lock bushing to accept standard 7/8-14 dies. Large 1 1/8 diameter ram drilled completely through to allow spent primer disposal direct to trash can with attached tube. Ram is two-piece to allow installation of the mammoth 50 BMG shell holder. All support by over 12 square inches of ram bearing surface. Accepts standard shell holders, ram insert can be rotated to allow primer installation on right or left side. e.

LEE – BREECH LOCK RELOADER PRESS ONLY

$82.25
Product Information
An outstanding value. Exclusive balance lever that can't drop down to pinch your fingers. Unlimited hand clearance that only a "C" frame can offer. Works equally well with the right or left hand. Even if you already own a press, an extra press is always useful for decapping, bullet seating or bullet sizing. Accepts standard 7/8 x14 thread dies and standard Universal Press Shell Holders. Press includes one Breech Lock quick change bushing.

LEE APP AUTOMATIC PROCESSING PRESS

$166.50
Product Information:
Introducing the Lee Automatic Processing Press, the fastest and easiest way to prepare cases and size cast bullets. It is also a very convenient single station reloading press. Includes:
  • Press
  • Automation Kit
  • X-PRESS shell holders #2, #4 and # 19
  • Bottle Adapter
LEE received the patent on this new press late last year (Patent # 10,076,781 B1). It is the first press of its kind with the ability to mount the die to the top or bottom of the press. This die mounting flexibility allows previously unheard of automation on a single station press. Now you can deprime, primer pocket swage, bulge bust or size cast bullets as fast as you can operate the lever. The press is actually heavy for its compact size. It is manufactured from a variety of materials best suited for the application. The lever or handles are made of steel and are topped with a molded grip we call the power grip. We went through a lot of iterations to come up with a really comfortable design. The grip is completely symmetrical making either hand operation a delight. The upper and lower die carriers are aluminum and the low stress items are nylon or acetal copolymer. The upper carrier rides on two centerless ground and roller burnished columns. The upper die carrier is counter balanced by a centrally mounted coil spring. The counter balance prevents the handle from falling and pinching a finger. The APP is a “frameless” design with nearly all the forces going directly to the dies through the steel linkages rather than through the frame. As a single stage reloading press it has almost unlimited visibility and hand clearance. Mounting is easy on any bench or table with no under swing.  Dirty, gritty, lead contaminated spent primers are 100% captured in a screw top bottle. The top carrier and base are machined to accept Lee Breech Lock bushings, so they will accept standard 7/8-14 dies of any manufacture. The APP also uses standard press shell holders from most manufactures. Includes one Spline drive breech lock bushing and universal type shell holder quick-change adaptor. A little over three inches of stroke allows sizing of the larger belted magnum cartridges. Priced less than nearly all single station presses makes it a perfect starter press or a perfect companion press to an expensive progressive. Automation package included, making it the world’s fastest single stage press. Now you can deprime cases, size cast bullets, swage primer pockets, etc. as fast as you can cycle the lever! Features revolutionary case and bullet feeder. Jaws automatically open and grasp the bullet or case. They then rapidly position the case or bullet into the operating position. Once in position the jaws instantly open and return for the next case or bullet. It is fascinating just cycling the press empty watching the jaws open and close as it cycles back and forth. The APP gets its speedy operation in part by the use of a new shell holder. We call it the X-press shell holder. The new shell holder allows the case to pass through the shell holder after the operations are performed. Includes the three most popular X-press shell holders (2, 4 and 19) that work on over 60 different cartridges. Complete with all the feed tubes, tube supports, risers and case slider. It even includes the 22-caliber bullet feed jaws. Photo note:  Shown mounted to Lee Reloading Stand with bin and bracket, sold separately. To swage casings you will need this attacment: Lee primer pocket swager. Designed exclusively for the APP press. Now you can swage primer pockets as fast as you can operate the press lever. #90237

LEE B.L. CHALLENGER BENCH PRIME PRESS KIT

$289.00
Product Information
Bench Prime Press Kit Featuring all of the components of the Lee 50th Anniversary Kit, but they’ve replaced the Safety Prime with the Auto Bench Prime and three of the most popular Priming Tool shell holders which work with over 60 different cartridges. This kit is ideal for those who want the flexibility of priming on the benchtop or off by mounting the tool to a piece of wood. If you purchase all components separately—a $294.78 value. Please note:  Breech Lock Challenger press is shown mounted to the Lee Bench Plate. Auto Bench Prime is compatible with the bench plate system. Consider ordering an additional Steel Base Block. These products are sold separately.